Welcome to Montgomery County Municipal Utility District No. 18

Through Montgomery County MUD 18’s website you can easily find links to the following services.

Collection Service Delay

Please be advised that collection service had been delayed yesterday within Montgomery County MUD 18 due to mechanical issues. The service provider will be returning to community today Tuesday, January 7, 2020 to complete service to those residents who may not have been served yesterday.

By |January 7th, 2020|

New MUD 18 Website

As of December 2019, a new website for MUD 18 was launched. Created by 1190 Designs, the new website is intended to provide the MUD 18 community with the most current information and to maintain compliance with State legislative requirements. Policies that govern the District have been reviewed and/or revised as of November/December 2019 and are published on the new website at www.mcmud18.com.

By |December 18th, 2019|

2019 Holiday Trash & Recycle Pickup

Waste and recycle collection will be provided as regularly scheduled following Christmas and New Year’s Day. Collection times may vary due to the increased volume resulting from the holidays. Please remember that recycle material should be broken down and contained to the cart.

If you have any questions regarding your service, please contact us directly at 1-800-800-5804, Monday through Friday from 8:00 am to 5:00 pm (Central Time). Alternatively, you may email us at cssatex@wm.com.

You may access your waste and recycle service guidelines by viewing your customized Waste Management community website at www.wm.com/us/us/local/tx/montgomery-co-mud-018/residential.

By |December 18th, 2019|

Reading Your Water Meter

To read a Neptune E‐Coder water meter:

  1. Shine a flashlight on the photoelectric eye (look for the flashlight symbol) to activate the screen. The screen eventually will begin to flash between “Reading” and “Rate”.
  2. The “Reading” is all water that has passed through the meter in its lifetime – measured in gallons. This is the reading used for billing purposes. Charges are based on units of 1,000 gallons of water used. Be sure to look for the decimal point when reading (see Photo 1). You can calculate how much water is used in a given period by recording the reading at the beginning of the period and at the end of the period. The total water used during that period is:
    • End reading – Beginning reading = Total water used during that period in gallons.
    • Example for a Residential Service:
      • Initial reading collected on 4/1/2013: 005234.12 gal
      • Second reading collected on 5/1/2013: 009438.23 gal
      • 9438.23 gal ‐ 5234.12 gal = 4204.11 gal water used between 4/1/2013 and 5/1/2013. This calculates to be 4,204.11 gallons used during this period. Note that for billing purposes the amount of water used in gallons is rounded down to the nearest 1000 gallons so 4,204.11 gallons becomes 4,000 gallons billed.
  3. The “Rate” is the amount of water (in gal /min) that is passing thru the meter at that moment. The ”Rate” can be used for leak detection: if all water in the building is shut off and a rate is observed this means that water is flowing through the meter. Since all water is shut off there must be leaking somewhere in your system.
  4. There is a leak indictor faucet icon (see Photo 2) built into this meter, that will either be on solid or flashing indicating that there has been a leak detected. The solid faucet indicates a continuous leak occurrence over the last 24 hrs. Check the last digit on your screen to see if it is incrementing. If so, check your interior and exterior faucets, the valves in your toilets, and look around the exterior of your home for signs of surface water. The flashing faucet indicates an intermittent leak occurrence over the past 24 hrs. Check your interior and exterior faucets and the valves in your toilets to see if leakage is occurring.
  5. View PDF
By |November 18th, 2019|